Changing the finisher staple cartridge, Changing the finisher staple cartridge -10 – Xerox DC User Manual
Page 316
Page 14 - 10
Xerox Document Centre Reference Guide
Changing the Finisher Staple Cartridge
The Document Centre Finisher has two staplers, each with a Staple
Cartridge that holds 5000 staples. The system will display a fault
screen when a cartridge needs to be replaced.
Complete the following steps to clear the fault message:
5. Press the Finisher Pause Button and wait for the tray to lower.
6. Open the stapler access door (located above the Main Tray).
7. Remove the Staple Cartridge. Refer to the diagram on the inside
of the stapler access door.
8. Insert the new Staple Cartridge and close the stapler access door.
9. Press the Finisher Pause Button to reactivate the Finisher.
NOTE
Contact Xerox if you have any problems removing or inserting the
Staple Cartridge.
Finisher Pause Button
Main Tray