Yamaha RX-V2400 - Manual (Page 36)

32
PLAYBACK
■ Front panel operation
Rotate PROGRAM to select the desired program.
The name of the selected program appears on the front
panel display and on the video monitor.
■ Remote control operation
Set 10 KEY/DSP to DSP, then press one of the
sound field program buttons repeatedly to select
the desired program.
The name of the selected program appears on the front
panel display and on the video monitor.
y
Choose a sound field program based on your listening preference,
and not on the name of the program.
• When you select an input source, this unit automatically selects
the last sound field program used with that source.
• Sound field programs cannot be selected when the MULTI CH
INPUT is selected.
• Sampling frequencies higher than 48 kHz (except for DTS 96/
24 signals) will be sampled down to 48 kHz, then sound field
programs will be applied.
■ Enjoying multi-channel software
If you connected a surround back speaker, use this feature
to enjoy 6.1/7.1-channel playback for multi-channel
sources using the Dolby Pro Logic IIx, Dolby Digital
Surround EX or DTS ES decoders.
Press EX/ES on the remote control to switch
between 5.1- and 6.1/7.1- channel playback.
To select a decoder, press l / h repeatedly when
PLIIx Movie (etc.) is displayed.
AUTO ( AUTO )
When a signal (flag) that can be recognized by the unit is
input, the unit selects the optimum decoder for playing
back the signal in 6.1/7.1 channels.
If the unit cannot recognize the flag or no flag is present in
the input signal, it cannot automatically be played in 6.1/
7.1 channels.
Decoders (select with l / h )
You can select from the following modes depending on the
format of the software you are playing.
PLIIx Movie For playing back Dolby Digital or DTS
signals in 6.1/7.1 channels using the Pro Logic IIx movie
decoder.
PLIIx Music For playing back Dolby Digital or DTS
signals in 6.1/7.1 channels using the Pro Logic IIx music
decoder.
EX/ES For playing back Dolby Digital signals in 6.1/7.1
channels using the Dolby Digital Surround EX decoder.
DTS signals are played back in 6.1/7.1 channels using the
DTS ES decoder.
EX For playing back Dolby Digital or DTS signals in 6.1/
7.1 channels using the Dolby Digital Surround EX
decoder.
OFF ( OFF )
For playing back Dolby Digital or DTS signals in 5.1
channels.
y
When SURR B L/R SP is set to “LRGx1” or “SMLx1” (see
page 49), the surround back channel will be output from the left
SURROUND BACK speaker terminals.
Selecting sound field programs
VOLUME
VIDEO AUX SILENT REC OUT /ZONE 2
SPEAKERS
INPUT
MULTI CH INPUT INPUT M MODE
PRESET/
TUNING
PHONES
SOURCE /REMOTE MD/TAPE CD–R TUNER
CD
DVD D–TV CBL/SAT
VCR 1
/VCR2 DVR
A/B/C/D/E
S VIDEO
MEMORY FM/AM
EDIT
PRESET
/TUNING
MAN'L/AUTO FM AUTO/MAN'L MONO
TUNING MODE
VIDEO AUDIO OPTICAL L R
STANDBY /ON
A B
OPTIMIZER MIC
TONE CONTROL
PROGRAM
STRAIGHT
EFFECT
PROGRAM
(U.S.A. model)
JAZZ CLUB
V–AUX DVR/VCR2 VCR 1 CBL/SAT DTV DVD MD/TAPE CD–R CD TUNER PHONO
HiFi DSP
VOLUME
A
SP
L L R
Program name
PROGRAM
STEREO
EX/ES
DSP 10KEY
ROCK
MOVIE THX
MUTE
VOLUME STEREO
TV INPUT
TV VOL CH
PRESET
DISC EFFECT
TV MUTE
MUSIC TV THTR ENTERTAIN
HALL CHURCH JAZZ
NIGHT /DTS
CHP/INDEX
A/B/C/D/E
1
5
9
6
10 +10 +100
7 8
2 3 4
Sound field
program
buttons
10 KEY/DSP
JAZZ CLUB
V–AUX DVR/VCR2 VCR 1 CBL/SAT DTV DVD MD/TAPE CD–R CD TUNER PHONO
HiFi DSP
VOLUME
A
SP
L L R
program name
STEREO
EX/ES
DSP 10KEY
ROCK
MOVIE THX
MUSIC TV THTR ENTERTAIN
HALL CHURCH JAZZ
NIGHT /DTS
CHP/INDEX
1
5
9
6
10 +10 +100
7 8
2 3 4
Notes
EX/ES
CHP/INDEX
00_RX-V2400U_EN.book Page 32 Friday, October 10, 2003 10:54 AM