Yamaha RX-V2400 - Manual (Page 41)

37
English
TUNING
BA
S
IC
OPERA
T
ION
■ Automatically presetting FM stations
You can use the automatic preset tuning feature to store
FM stations. This function enables this unit to
automatically tune in to FM stations with strong signals,
and to store up to 40 (8 stations x 5 groups) of those
stations in order. You can then recall any preset station
easily by selecting the preset station number.
1
Press FM/AM to select the FM band.
2
Press TUNING MODE (AUTO/MAN’L MONO)
so that the “AUTO” indicator lights up on the
front panel display.
3
Press and hold MEMORY (MAN’L/AUTO FM)
for more than 3 seconds.
The preset number, the “MEMORY” and “AUTO”
indicators flash. After about 5 seconds, automatic
presetting starts from the frequency currently
displayed and proceeds toward the higher
frequencies.
When automatic preset tuning is completed, the front
panel display shows the frequency of the last preset
station.
• Any stored station data existing under a preset number is
cleared when you store a new station under that preset number.
• If the number of the received stations does not reach E8,
automatic preset tuning has automatically stopped after
searching all stations.
• Only FM stations with sufficient signal strength are stored
automatically by automatic preset tuning. If the station you
want to store is weak in signal strength, tune in to it manually in
the monaural mode, and store it by following the procedure in
“Manually presetting stations”.
Automatic preset tuning options
You can select the preset number from which this unit will
store FM stations and/or begin tuning toward lower
frequencies.
After pressing MEMORY in step 3:
1 Press A/B/C/D/E, then PRESET/TUNING l/h to
select the preset number under which the first station
will be stored. Automatic preset tuning will stop when
stations have all been stored up to E8.
2 Press PRESET/TUNING (EDIT) to turn off the colon
(:) and then press PRESET/TUNING l to begin
tuning toward lower frequencies.
Presetting stations
VOLUME
VIDEO AUX SILENT REC OUT /ZONE 2
SPEAKERS
INPUT
MULTI CH INPUT INPUT MODE
PRESET/
TUNING
PHONES
SOURCE /REMOTE MD/TAPE CD–R TUNER
CD
DVD D–TV CBL/SAT
VCR 1
/VCR2 DVR
A/B/C/D/E
S VIDEO
MEMORY FM/AM
EDIT
PRESET
/TUNING
MAN'L/AUTO FM AUTO/MAN'L MONO
TUNING MODE
VIDEO AUDIO OPTICAL L R
STANDBY /ON
A B
OPTIMIZER MIC
TONE CONTROL
PROGRAM
STRAIGHT
EFFECT
3 2 1 (U.S.A. model)
FM/AM
TUNING
MODE
AUTO/MAN'L MONO
AUTO
Lights up
MEMORY
MAN'L/AUTO FM
V–AUX DVR/VCR2 VCR 1 CBL/SAT DTV DVD MD/TAPE CD–R CD TUNER PHONO
AUTO
MEMORY VOLUME
A
SP
L L R A 1 : F M 8 7 . 5 M H z
Notes
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is set in the standby
mode, the power cord is disconnected from the AC
outlet, or the power supply is temporarily cut due to
power failure. However, if the power is cut for more
than one week, the preset stations may be cleared. If
so, store the stations again by using the presetting
station methods.
00_RX-V2400U_EN.book Page 37 Friday, October 10, 2003 10:54 AM