2 cleaning around the bottom of heads – Xerox 8290 User Manual
Page 115
6 Maintenance
8265/8290/8365/8390 User Guide
107
6.2.1.2 Cleaning around the bottom of heads
Step 1 :
Open the left maintenance covers by removing the four screws.
Step 2 :
Power ON the printer.
Step 3 :
Go to the H.Unlock Menu and press the F2 key to unlock the carriage.
Step 4 :
Open the Front Cover.
Step 5 :
Slide the carriage into the left maintenance area.
Step 6 :
Clean the edges of the heads with a cleaning swab wetted by Eco-solvent Cleaning Liquid.
Make sure you do not touch, clean the nozzle plate; this would lead to poorer print quality.
Caution
•
Make sure not to touch the nozzle plate. This could lead to poorer print quality.
•
It is recommended to wear gloves (2) as shown on the picture below.
1
Cleaning Swabs
2 Gloves