Xerox 8290 - Manual (Page 119)

6 Maintenance
8265/8290/8365/8390 User Guide 111
6.2.4 Semi-Annual Maintenance
6.2.4.1 Change upper sponge at back of the capping station.
Step 1 :
Power ON the printer.
Step 2 :
Go to the H.Unlock Menu and press F2.
Step 3 :
Open the Front Cover.
Step 4 :
Slide the carriage to the left to access the upper sponge.
Step 5 :
Remove the two screws fixing the sponge (1).
1 = Screws fixing the sponge (1)
Step 6 :
Replace the sponge and tighten it again to the plate with the two screws.
1 = Capping sponge
2 = Plate
Step 7 :
Close the Front Cover.
Step 8 :
Press the [ENTER] key to exit the H.Unlock Menu. The carriage will cap in and be locked.