Maintenance and servicing, Fitting a new door seal – Yeoman CL MILNER BRICK YMMB User Manual

Page 26

Advertising
background image

26

PR8739

Glass rope

seal

B

Black face

Place the glass into position in the door.

Place the glass clamp into position.

Re-fix with the clean fixing screws.

Tighten the screws evenly until the clamp holds the

glass.

6.2 Fitting the door is the reverse of the process detailed in

Installation Section 2, Page 20.

The door may require some adjustment once refitted, see

Maintenance & Servicing Section 8, Page 27.

Do not over tighten the clamp as this could break the

glass.

6.3 Fit only Yeoman ceramic glass, which is suitable to use in

high temperature applications.

6.4 Using the appliance with damaged door glass could allow

dangerous fumes to enter the room, or the appliance to

over-fire and cause damage.

MAINTENANCE and SERVICING

7. FITTING A NEW DOOR SEAL

7.1 To maintain the safe use of your appliance you may need to

replace a damaged or worn door sealing rope. To do this:

Open the door.

Lift it free of the hinge blocks - see Section 6.1.

Lie the door face down on a soft flat surface, to protect

the paintwork and glass.

PR8758

Joint

Mid door

rope seal E

Door rope seal D

Door rope seal C

Seal

Length (mm)

Door rope seal C

1070

Door rope seal D

170

Remove the old rope.

Scrape old glue from the locating groove.

Clean the locating groove with a clean dry cloth

removing all dust and debris.

Apply Stovax Thermic Seal glue (Stovax Part No. 5037)

into the rope locating groove.

Press the new rope into the locating groove,

placing the joint in the middle of the lower edge of the

door.

Refit the door.

Close to apply pressure on the new rope.

7.2 Fitting the door is the reverse of the process detailed in

Installation Section 2, Page 20.

The door may require some adjustment once refitted, see

Maintenance & Servicing Section 8, Page 27.

7.3 Leave the appliance closed for at least 12 hours before

lighting the stove.

7.4 Use at a low temperature for approximately one day.

Using the stove with a damaged door seal could allow

dangerous fumes to enter the room, or the appliance to

over-fire and cause damage.

Advertising