ZyXEL Communications ZyXEL ZyAIR B-4000 - Manual (Page 31)

ZyAIR B-4000 Hot Spot Gateway
The Web Configurator 2-7
Table 2-2 Default Settings
LABEL DESCRIPTION
Clear all
configuration Select this option to reset system configuration back to the factory defaults and erase
all custom configuration (including as subscriber account information).
Keep subscriber
profile Select this option to reset the system configuration back to the factory default but
retain subscriber account information. All other custom configuration is erased.
Apply Click Apply to reset the ZyAIR.
2.7 Restarting the ZyAIR
You must restart the ZyAIR every time you change the system IP address or upload a firmware or
configuration file.
Click the SYSTEM TOOLS tab, Restart and then Apply.
Figure 2-7 Restart
When the ZyAIR restarts, all connections will be terminated. Subscribers need to
log in again.
2.8 Logging Out of the Web Configurator
Click the SYSTEM TOOLS tab, Logout and Apply to exit from the web configurator.
Figure 2-8 Logging Out