ZyXEL Communications ZyXEL ZyAIR B-4000 - Manual (Page 33)

ZyAIR B-4000 Hot Spot Gateway
General System Setup 3-1
Chapter 3
General System Setup
This chapter describes how to configure the System and LAN/WAN advanced setup screens.
3.1 General System Settings
Click the ADVANCED SETUP tab and then System to open this screen.
The Domain Name entry is what is propagated to the DHCP clients on the LAN. If you leave this blank,
the domain name obtained by a DHCP server is used. While you must enter the host name (System Name)
on each individual computer, the domain name can be assigned from the ZyAIR via DHCP.
Figure 3-1 System
The following table describes the labels in this screen.