ZyXEL Communications ZyXEL ZyAIR B-4000 - Manual (Page 41)

ZyAIR B-4000 Hot Spot Gateway
WAN, LAN and Server Setup 4-7
Figure 4-2 Server
The following table describes the fields in this screen.
Table 4-2 Server
LABEL DESCRIPTION
Web Server
Web Server Port Specify the port number of the embedded web server on the ZyAIR for accessing
the web configurator. The default port number is 80.
Enter a number between 8010 and 8060 to access the web configurator behind a
NAT-enabled network.
If you enter a number between 8000 and 8099, you need to append the port
number to the WAN or LAN port IP address to access the web configurator. For
example, if you enter “8010” as the web server port number, then you must enter
“http://www.192.168.1.1:8010” where 192.168.1.1 is the WAN or LAN port IP
address.