ZyXEL Communications 802.11g ADSL 2+ 4-Port Security Gateway HW-D Series - Manual (Page 105)

P-662H/HW-D Series User’s Guide
Chapter 5 WAN Setup 105
5.10 Dial Backup Modem Setup
Click Edit in the WAN > WAN Backup Setup > Advanced Setup screen to configure the
advanced modem settings.
Connect on
Demand
Select Connect on Demand when you don't want the connection up all the time
and specify an idle time-out in the Max Idle Timeout field.
Max Idle Timeout Specify an idle time-out in the Max Idle Timeout field when you select Connect on
Demand. The default setting is 0, which means the Internet session will not timeout.
Budget The configuration in the Budget fields has priority over your Connection settings.
Allocate Budget Type the amount of time (in minutes) that the dial backup connection can be used
during the time configured in the Period field. Set an amount that is less than the
time period configured in the Period field. If you set the Allocated Budget to 0, you
will not be able to use the dial backup connection.
Period Type the time period (in hours) for how often the budget should be reset. For
example, to allow calls to this remote node for a maximum of 10 minutes every
hour, set the Allocated Budget to 10 (minutes) and the Period to 1 (hour). If you set
the Period to 0, there is no budget control and the ZyXEL Device uses the
Connection settings.
Back Click Back to return to the previous screen.
Apply Click Apply to save the changes.
Cancel Click Cancel to begin configuring this screen afresh.
Table 28 WAN Backup Advanced Setup
LABEL DESCRIPTION