ZyXEL Communications 802.11g ADSL 2+ 4-Port Security Gateway HW-D Series - Manual (Page 267)

P-662H/HW-D Series User’s Guide
Chapter 17 Certificates 267
Use the Directory Servers screen to configure a list of addresses of directory servers (that
contain lists of valid and revoked certificates).
17.4 My Certificates
Click Security > Certificates > My Certificates to open the My Certificates screen. This is
the ZyXEL Device’s summary list of certificates and certification requests. Certificates
display in black and certification requests display in gray.
Figure 141 My Certificates
The following table describes the labels in this screen.
Table 101 My Certificates
LABEL DESCRIPTION
PKI Storage
Space in Use
This bar displays the percentage of the ZyXEL Device’s PKI storage space that is
currently in use. The bar turns from green to red when the maximum is being
approached. When the bar is red, you should consider deleting expired or
unnecessary certificates before adding more certificates.
Replace This button displays when the ZyXEL Device has the factory default certificate.
The factory default certificate is common to all ZyXEL Devices that use certificates.
ZyXEL recommends that you use this button to replace the factory default
certificate with one that uses your ZyXEL Device's MAC address.
# This field displays the certificate index number. The certificates are listed in
alphabetical order.
Name This field displays the name used to identify this certificate. It is recommended that
you give each certificate a unique name.