Figure 35 wireless lan setup 3, Table 18 manually assign a wep key – ZyXEL Communications 802.11g ADSL 2+ 4-Port Security Gateway HW-D Series User Manual

Page 77

Advertising
background image

P-662H/HW-D Series User’s Guide

Chapter 3 Wizard Setup for Internet Access

77

The following table describes the labels in this screen.

5 Click Apply to save your wireless LAN settings.

Figure 35 Wireless LAN Setup 3

6 Use the read-only summary table to check whether what you have configured is correct.

Click Finish to complete and save the wizard setup.

Table 18 Manually assign a WEP key

LABEL

DESCRIPTION

Key

The WEP keys are used to encrypt data. Both the ZyXEL Device and the wireless

stations must use the same WEP key for data transmission.
Enter any 5, 13 or 29 ASCII characters or 10, 26 or 58 hexadecimal characters ("0-9",

"A-F") for a 64-bit, 128-bit or 256-bit WEP key respectively.

Back

Click Back to display the previous screen.

Next

Click Next to proceed to the next screen.

Exit

Click Exit to close the wizard screen without saving.

Advertising
This manual is related to the following products: