ZyXEL Communications Parental Control Gateway HS100/HS100W User Manual
Page 214
HomeSafe User’s Guide
Introducing the SMT
17-3
Table 17-1 Main Menu Commands
Entering
information
Type in or press
[SPACE BAR], then
press [ENTER].
You need to fill in two types of fields. The first requires you to type
in the appropriate information. The second allows you to cycle
through the available choices by pressing [SPACE BAR].
Required fields
<
?
> or ChangeMe All fields with the symbol <?> must be filled in order to be able to
save the new configuration.
All fields with ChangeMe must not be left blank in order to be able
to save the new configuration.
N/A fields
<N/A>
Some of the fields in the SMT will show a <N/A>. This symbol
refers to an option that is Not Applicable.
Save your
configuration
[ENTER]
Save your configuration by pressing [ENTER] at the message
“Press ENTER to confirm or ESC to cancel”. Saving the data on the
screen will take you, in most cases to the previous menu.
Exit the SMT
Type 99, then press
[ENTER].
Type 99 at the main menu prompt and press [ENTER] to exit the
SMT interface.
After you enter the password, the SMT displays the main menu, as shown next.
Figure 17-3 SMT Main Menu
17.2.1 System Management Terminal Interface Summary
Table 17-2 Main Menu Summary
# MENU
TITLE
DESCRIPTION
1
General Setup
Use this menu to set up your general information.
2
WAN Setup
Use this menu to clone a MAC address from a computer on your LAN.
3
LAN Setup
Use this menu to set up your LAN and WLAN connection.
4
Internet Access Setup
Configure your Internet Access setup (Internet address, gateway, login,
etc.) with this menu.
11
Remote Node Setup
Use this menu to configure detailed remote node settings (your ISP is
also a remote node) as well as apply WAN filters.
12
Static Routing Setup
Use this menu to set up static routes.
Copyright (c) 1994 - 2004 ZyXEL Communications Corp.
HS-100/HS-100W Main Menu
Getting Started Advanced Management
1. General Setup 21. Filter and Firewall Setup
2. WAN Setup 22. SNMP Configuration
3. LAN Setup 23. System Security
4. Internet Access Setup 24. System Maintenance
26. Schedule Setup
Advanced Applications
11. Remote Node Setup
12. Static Routing Setup
14. Dial-in User Setup
15. NAT Setup
99. Exit
Enter Menu Selection Number: