ZyXEL Communications Parental Control Gateway HS100/HS100W - Manual (Page 39)

HomeSafe User’s Guide
2-6 Introducing the Web Configurator
Table 2-5 Wizard Step 3 : Internet Access Setup
LABEL DESCRIPTION
Are you using
a DSL service
provider that
requires a
PPPoE login
name and
password? Select Yes from the drop-down list box if you are using a DSL service provider that requires
PPPoE login information.
Select No from the drop-down list box if your service provider does not require you to enter
PPPoE information. You can select whether to configure a static WAN IP address or have it
assigned dynamically.
Back Click Back to display the previous screen.
Next Click Next to proceed to the next screen.
2.5.1 Step 3 : Internet Configuration Setup ISP Parameters
If you click Yes in the previous screen, you must type your PPPoE login name and password.
Figure 2-7 Wizard Step 3 : ISP Parameters
The following table describes the labels in this screen.
Table 2-6 Wizard Step 3 : ISP Parameters
LABEL DESCRIPTION
User Name Type the user name given to you by your ISP.
Password Type the password associated with the user name above.
Back Click Back to display the previous screen.
Next Click Next to proceed to the Figure 2-10 screen.
2.5.2 Step 3 : Internet Access Setup
If you click No in the Internet Access Setup screen you must select DHCP or Static WAN IP
address assignment.