Yamaha RX-V1800 - Manual (Page 47)

43
En
Playback
BA
S
IC
OPERA
T
ION
English
This unit comes with a variety of input jacks. Use this
feature (audio input jack select) to switch the input jack
assigned to an input source when more than one jacks are
assigned to an input source.
y
• We recommend that you set the audio input jack select setting to
“AUTO” in most cases.
• You can adjust the default audio input jack select setting of this
unit by using “AUDIO SELECT” in “OPTION MENU” (see
page 94).
1
Rotate the C
INPUT selector (or press one
of the input selector buttons (1)) to select
the desired input source.
2
Press D
AUDIO SELECT (or 9AUDIO SEL)
repeatedly to select the desired audio input
jack select setting.
This feature is not available when no digital input jack
(OPTICAL, COAXIAL and HDMI) are assigned. In addition,
HDMI is not available as an Audio input jack select setting when
the HDMI input jacks are not used. Use “I/O ASSIGNMENT” in
“INPUT MENU” to reassign the respective input jack (see
page 89).
Use this feature to select the component connected to the
MULTI CH INPUT jacks (see page 30) as the input
source.
Rotate the C
INPUT selector on the front panel
to select MULTI CH (or press 1
MULTI CH IN).
y
Use “MULTI CH” menu in “INPUT MENU” to set the
parameters for “MULTI CH” (see page 88).
Sound field programs cannot be selected when the component
connected to the MULTI CH INPUT jacks is selected as the input
source.
Connect a pair of headphones with a stereo
analog audio cable plug to the PHONES jack on
the front panel.
y
When you select a sound field program, SILENT CINEMA mode
activates automatically (see page 51).
• When you connect headphones, no signals are output at the
speaker terminals.
• When the component connected to the MULTI CH INPUT
jacks of this unit is selected as the input source, only the signals
input at the MULTI CH INPUT FRONT jacks are output from
the connected headphones.
• All digital multi-channel audio signals are mixed down to the
left and right headphone channels.
Selecting audio input jacks
(AUDIO SELECT)
AUTO Automatically selects input signals in the
following order:
(1) HDMI
(2) Digital signals
(3) Analog signals
HDMI Selects only HDMI signals. When HDMI
signals are not input, no sound is output.
COAX/OPT Automatically selects input signals in the
following order:
(1) Digital signals input at the COAXIAL jack.
(2) Digital signals input at the OPTICAL jack.
When no signals are input, no sound is output.
ANALOG Selects only analog signals. If no analog
signals are input, no sound is output.
Note
CD-R CD PHONO MULTI CH TUNER XM MD/TAPE BD/HD DVD DVD DVR DTV/CBL VCR V-AUX
A . S E L : A U T O
Currently selected audio input
jack select setting
Available input sources
Selecting the MULTI CH INPUT
component
Note
Using your headphones
Notes
MASTER
PURE DIRECT
VOLUME
MAIN ZONE
INPUT
OFF ON
SLEEP
ZONE ON/OFF ZONE CONTROLS
MULTI ZONE
MIC OPTIMIZER
EFFECT
PROGRAM
YPAO
ZONE 3
R L OPTICAL
ZONE 2
AUDIO
VIDEO AUX
SILENT CINEMA S VIDEO VIDEO
PHONES
DISPLAY
MODE TUNING PRESET/TUNING/CH
SEARCH MODE
EDIT FM/AM TUNING PRESET/ MAN'L/AUTO FM MEMORY
STRAIGHT
CATEGORY
CONTROL SELECT AUDIO TONE A/B/C/D/E
ON/OFF