Yamaha RX-V1800 - Manual (Page 71)

67
En
AD
V
ANCED
OPERA
T
ION
English
You can enjoy good quality sound with the initial factory
settings. Although you do not have to change the initial
factory settings, you can change some of the parameters to
better suit the input source or your listening room.
You cannot change the sound field parameter values when
“MEMORY GUARD” in “OPTION MENU” is set to “ON” (see
page 93). If you want to change the sound field parameter values,
set “MEMORY GUARD” to “OFF”.
1
Turn on the video monitor connected to this
unit.
2
Set the operation mode selector to C
AMP
and then press I
PARAMETER on the
remote control.
The following display is shown in the OSD.
3
Press one of the sound field program
selector buttons (N) repeatedly to select the
desired sound field program you want to
adjust.
4
Press 3k / n to select the desired sound
field parameter and then 3l / h to change
the selected sound field parameter value.
• Press 3h to increase the value.
• Press 3l to decrease the value.
y
• For details about the function and control range of each sound
field parameter, see page 69.
• When you set a sound field parameter to a value other than the
initial factory settings, an asterisk mark (*) appears by the
sound field parameter name in the OSD.
• Repeat steps 3 and 4 as necessary to change other sound field
program parameter settings.
• The available sound field parameters for some of the sound field
programs may be displayed on more than one page in the OSD.
In this case, press 3k / n to scroll through pages.
• If you press and hold 3l / h to change the sound field
parameter value, the initial factory settings are shown
momentarily in the front panel display.
• To initialize the parameters of the selected sound field program,
press 3n repeatedly to select “INITIALIZE” and then press
3
h. Once the confirmation screen appears in the OSD, press
3 h to confirm or 3l to cancel the initialization.
5
Press I
PARAMETER to turn off the sound
field parameter display.
Advanced sound configurations
Changing sound field parameter
settings
Note
Sound field program category
Sound field parameters Sound field parameter
values
[p]/[[]:
MOVIE 1/2
Sci-Fi
SUR.;;PLIIx Movie
DSP LEVEL;;;;;0dB
P.INIT.DLY;;;16ms
P.ROOM SIZE;;;1.0
S.INIT.DLY;;;16ms
S.ROOM SIZE;;;1.0
Select
. Cursor
SYSTEM MEMORY feature
You can save multiple customized sound field parameter
settings by using the SYSTEM MEMORY feature. See
page 96 for details.
[[]:
MOVIE 2/2
Sci-Fi
SB INIT.DLY;;15ms
SB ROOM SIZE ;;1.0
DIALOG LIFT;;;;;0
INITIALIZE
Initialize
.