Yamaha RX-V1800 - Manual (Page 60)

56
En
FM/AM tuning
4
Press G
PRESET/TUNING/CH l / h to
select a preset station number (1 to 8) while
the MEMORY indicator is flashing.
• Press Gh to select a higher preset station number.
• Press Gl to select a lower preset station number.
5
Press J
MEMORY while the MEMORY
indicator is flashing.
The station band and frequency appear in the front
panel display with the preset station group and
number you have selected. The MEMORY indicator
disappears from the front panel display.
• Any stored station data existing under a preset station number is
cleared when you store a new station under the same preset
station number.
• The reception mode (stereo or monaural) is stored along with
the station frequency.
You can tune into any desired station simply by selecting
the preset station group and number under which it was
stored.
1
Press F
A/B/C/D/E (or 3A-E/CAT. l / h)
repeatedly to select the desired preset
station group (A to E).
The preset station group letter appears in the front
panel display and changes each time you press the
button.
2
Press G
PRESET/TUNING/CH l / h (or
3 PRESET/CH k / n) repeatedly to select
the desired preset station number (1 to 8).
The preset station group and number appear in the
front panel display along with the station band and
frequency.
Notes
MEMORY A 1 : F M 8 8 . 9 M H z
Preset station number Flashes
A 1 : F M 8 8 . 9 M H z
The displayed station has been stored as A1.
Selecting preset stations
Set the operation mode selector to CSOURCE and then
press 1TUNER to select “TUNER” as the input source.
A 1 : F M 8 8 . 9 M H z