Zenith Z56DC1D - Manual (Page 49)

Owner’s Manual 49
No picture &
No sound
• Check whether the TV is turned on.
• Is the power cord inserted into wall power outlet?
; Is the power cord connected to the TV set properly?
• Test the wall power outlet, plug another product’s power cord into the outlet
where the TV’s power cord was plugged in.
No or poor color
or poor picture
• Select Color in the Picture menu and press the G button.
(Refer to p.26)
• Keep a sufficient distance between the TV and the VCR.
• Activate any function to restore the brightness of the picture.
The remote control
doesn’t work
• Check to see if there is any object between the TV and the remote control
causing obstruction.
• Are batteries installed with correct polarity (+ to +, - to -)?
(Refer to p.12)
• Correct remote operating mode set: TV, VCR etc.?
• Install new batteries. (Refer to p.12)
Picture OK &
No sound
• Press the VOLUME ( D D / E E ) button.
• Sound muted? Press MUTE button.
Picture appears slowly
after switching on
• This is normal, the image is muted during the TV startup process. Please
contact your service center, if the picture has not appeared after five minutes.
Horizontal/vertical bars
or picture shaking
• Check for local interference such as an electrical appliance or power tool.
T T roubleshooting Checklist roubleshooting Checklist