Yamaha RX-V3900 User Manual

Page 96

Advertising
background image

92

En

Graphical user interface (GUI) menu

5

Repeat steps 3 and 4 until you are satisfied
with the results.

y

If you want to reset all “Parametric EQ” parameter settings
for the selected speaker, select “RESET” and press
9ENTER.

6

Select “EXIT” and press 9

ENTER to exit

from the settings window.

Tone Control (Tone control)

Use this feature to adjust the balance of bass and treble
output to your speakers or headphones.

Tone Control is not effective when:
– the PURE DIRECT mode (page 47) is selected.
– MULTI CH is selected as the input source.

Control (Control mode)

y

“Speaker” and “Headphone” adjustments are stored
independently. The adjustments for “Speaker” affects the front
left/right, center, presence left/right speaker channels and
Subwoofer channel.

Bass (Bass control)
Use this feature to adjust low-frequencies output to your
speakers or headphones.
Choices: 125 Hz, 350 Hz, 500 Hz
Control range: –6.0 dB to +6.0 dB
Initial setting: 0.0 dB

Treble (Treble control)
Use this feature to adjust high-frequencies output to your
speakers or headphones.
Choices: 2.5 kHz, 3.5 kHz, 8.0 kHz
Control range: –6.0 dB to +6.0 dB
Initial setting: 0.0 dB

Auto Bypass (Auto bypass)
Use this feature to select whether the audio output
bypasses the tone control circuitry when “Treble” and
“Bass” are set to 0 dB.

Lipsync

(Audio and video synchronization)

Mode (HDMI automatic lip sync mode)
If the video monitor is connected to the HDMI OUT jack
of this unit and compatible with the automatic audio and
video synchronization function (automatic lip sync), this
unit adjusts the audio and video synchronization
automatically. Use this feature to activate or deactivate the
automatic lip sync.

When “HDMI OUT SEL” is set to “OUT 1+2” and video
monitors are connected to both the HDMI OUT 1 and HDMI
OUT 2 jacks, the automatic lip sync function does not work
even if “Auto” is selected.

Auto (Automatic audio delay adjustment)
Use this feature to make fine adjustments of the audio and
video synchronization when you set “Mode” to “Auto”.
Control range: 0 to 240 ms
Control step: 1 ms

y

“Offset” indicates the difference between the value of the audio
delay that this unit sets automatically and the value of the audio
delay that you set in “Mode”. This unit stores the value of
“Offset” and applies the value to other automatic lip sync
compatible video monitors.

Manual (Manual audio delay adjustment)
Use this feature to adjust the delay of the sound output
manually to synchronize audio with video images when
you set “Mode” to “Manual”.
Control range: 0 to 240 ms
Control step: 1 ms

Note

Choice

Functions

Speaker

Adjust the bass/treble balance of your speakers.

Headphone

Adjust the bass/treble balance of your
headphones.

Choice

Functions

Auto

Automatically bypasses the tone control
circuitry to provide the purest signal possible
when “Treble” and “Bass” are set to 0 dB.

Off

Does not bypass the tone control circuitry.

Choice

Descriptions

Auto

Select this setting if the connected video
monitor is compatible with the automatic lip
sync. Use “Auto” to fine adjust the audio and
video synchronization.

Manual

Select this setting if the video monitor is not
compatible with the automatic lip sync or you
do not want to use the automatic lip sync. Use
“Manual” to adjust the audio and video
synchronization.

Note

Advertising