Zebra Technologies EPL2 - Manual (Page 69)

GM Command - Store Graphics
Example: GK"LOGO1"↵ :deletes graphic “LOGO1” - Required
GK"LOGO1"↵ :second delete graphic - Required
GM"LOGO1"584↵ :Prepares printer to receive graphic
:“LOGO1”
DATA : Data string in PCX format
If using a DOS system, the PCX format file (bi-
nary data) portion can be sent to the printer us-
ing the DOS COPY command. For example, if
you have a PCX file named LOGO1.PCX in
your current directory, the appropriate com-
mand would be:
COPY LOGO1.PCX PRN /b
After downloading, the GI command can be
used to verify that the graphic was successfully
stored.
Example: First, create a text file “STOREIT.TXT” with an
ASCII text editor, as follows:
¿
GK“WORLD” ¿
GK“WORLD” ¿
GM"WORLD"2004 ¿
Where WORLD is the name of the graphic and
2004 is the size (in bytes) of the PCX file.
Next, at the DOS prompt, type:
COPY STOREIT.TXT + WORLD.PCX PRN /b
980352-001 Rev.A
3-51