Zebra Technologies EPL2 - Manual (Page 97)

q Command - Set Label Width
All Printers
(Exceptions - 2746 & 2348)
This command will automatically set the left margin
according to the following rules:
(print head width - label width) / 2
The q value affects the available print width. Mini-
mizing the q value will maximize the print length and
print speed (double buffering).
If the R Command (Reference Point) is sent after this
command, the image buffer will be automatically re-
formatted to match the width of the print head and is
offset by the R command specified image buffer
starting point, nullifying the q command.
Example: q416↵ :sets label width to 416 dots wide
980352-001 Rev.A
3-79