ZyXEL Communications Internet Security Appliance ZyWALL5UTM 4.0 - Manual (Page 583)

ZyWALL 5/35/70 Series User’s Guide
583 Chapter 44 Filter Configuration
44.2 Configuring a Filter Set
The ZyWALL includes filtering for NetBIOS over TCP/IP packets by default. To configure
another filter set, follow the procedure below.
1 Enter 21 in the main menu to open menu 21.
Figure 342 Menu 21: Filter and Firewall Setup
Menu 21 - Filter and Firewall Setup
1. Filter Setup
2. Firewall Setup
Enter Menu Selection Number:
2 Enter 1 to bring up the following menu.
Figure 343 Menu 21.1: Filter Set Configuration
Menu 21.1 - Filter Set Configuration
Filter Filter
Set # Comments Set # Comments
------ ----------------- ------ -----------------
1 _______________ 7 _______________
2 _______________ 8 _______________
3 _______________ 9 _______________
4 _______________ 10 _______________
5 _______________ 11 _______________
6 _______________ 12 _______________
Enter Filter Set Number to Configure= 0
Edit Comments= N/A
Press ENTER to Confirm or ESC to Cancel:
3 Select the filter set you wish to configure (1-12) and press [ENTER] .
4 Enter a descriptive name or comment in the Edit Comments field and press [ENTER].
5 Press [ENTER] at the message [Press ENTER to confirm] to open Menu 21.1.1 - Filter
Rules Summary.
This screen shows the summary of the existing rules in the filter set. The following tables
contain a brief description of the abbreviations used in the previous menus.