ZyXEL Communications Internet Security Appliance ZyWALL5UTM 4.0 - Manual (Page 640)

ZyWALL 5/35/70 Series User’s Guide
Chapter 50 IP Policy Routing 640
Figure 395 Menu 25.1.1: IP Routing Policy Setup
Menu 25.1.1 - IP Routing Policy Setup
Apply policy to packets received from:
LAN= No
DMZ= No
WLAN= No
ALL WAN= Yes
Selected Remote Node index= N/A
Press ENTER to Confirm or ESC to Cancel:
The following table describes the fields in this screen.
Table 241 Menu 25.1.1: IP Routing Policy Setup
FIELD DESCRIPTION
LAN/DMZ/WLAN/
ALL WAN
Press [SPACE BAR] to select Yes or No. Choose Yes and press [ENTER] to apply
the policy to packets received on the specific interface(s).
Selected Remote
Node index
If you select No in the ALL WAN field, enter the number of the WAN port.
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm…" to
save your configuration, or press [ESC] at any time to cancel.
50.3 IP Policy Routing Example
If a network has both Internet and remote node connections, you can route Web packets to the
Internet using one policy and route FTP packets to a remote network using another policy. See
the next figure.
Route 1 represents the default IP route and route 2 represents the configured IP route.