Table 1 front panel leds – ZyXEL Communications P-334U User Manual
Page 35
P-334U/P-335U User’s Guide
Chapter 1 Getting to Know Your ZyXEL Device
35
The following table describes the LEDs.
Table 1 Front Panel LEDs
LED
COLOR
STATUS
DESCRIPTION
PWR
Green
On
The ZyXEL Device is receiving power and functioning
properly.
Blinking
The ZyXEL Device is performing testing.
Red
On
Power to the ZyXEL Device is too low.
None
Off
The ZyXEL Device is not receiving power.
LAN 1-4
Green
On
The ZyXEL Device has a successful 10Mb Ethernet
connection.
Blinking
The ZyXEL Device is sending/receiving data.
Amber
On
The ZyXEL Device has a successful 100Mb Ethernet
connection.
Blinking
The ZyXEL Device is sending/receiving data.
None
Off
The LAN is not connected.
WAN
Green
On
The ZyXEL Device has a successful 10Mb WAN
connection.
Blinking
The ZyXEL Device is sending/receiving data.
Amber
On
The ZyXEL Device has a successful 100Mb Ethernet
connection.
Blinking
The ZyXEL Device is sending/receiving data.
None
Off
The WAN connection is not ready, or has failed.
A/G
Green
On
The ZyXEL Device is in IEEE 802.11b or g wireless LAN
mode, but is not sending/receiving data through the
wireless LAN.
Blinking
The ZyXEL Device is sending/receiving data through the
IEEE 802.11b or g wireless LAN.
Amber
On
The ZyXEL Device is in IEEE 802.11a wireless LAN
mode, but is not sending/receiving data through the
wireless LAN.
Blinking
The ZyXEL Device is sending/receiving data through the
IEEE 802.11a wireless LAN.
None
Off
The wireless LAN is not ready or has failed.
OTIST
Green
Blinking
OTIST is in progress
On
OTIST is activated and the wireless security settings are
given to a wireless client. The LED remains on unless
the WLAN settings are changed.
None
Off
OTIST is not activated or WLAN settings are manually
configured after OTIST is successful.
USB
(P-335U only)
Off
The print server connection is not ready, or has failed.
Green
On
The print server has a successful connection.
Blinking
The print server is sending/receiving data.