ZyXEL Communications P-334U - Manual (Page 86)

P-334U/P-335U User’s Guide
86 Chapter 5 Wireless Tutorial
Figure 48 AP: Wireless LAN > General
3 Make sure the Enable Wireless LAN check box is selected.
4 Enter SSID_Example3 as the SSID, select a channel or select Auto Channel Selection
to have the AP choose a channel which is not used by another AP and display the channel
number in the field below after you click Apply.
5 Set security mode to WPA-PSK and enter ThisismyWPA-PSKpre-sharedkey in the
Pre-Shared Key field. Click Apply.
6 Open the Status screen.Verify your wireless and wireless security settings under Device
Information and check if the WLAN connection is up under Interface Status.