3 acs-pri/bri card user screens and settings, 1 acs-pri/bri card main screen, 1 main screen parameters – Zhone Technologies 800 User Manual
Page 79: Acs-pri/bri card user screens and settings -13, Acs-pri/bri card main screen -13, Main screen parameters -13, Acs-pri/bri call status screen -13
Server Cards
IMACS System Release 5.1.6
4-13
ACS-PRI/BRI Card
ACS-PRI/BRI Card User Screens and Settings
4.3
ACS-PRI/BRI Card User Screens and Settings
4.3.1
ACS-PRI/BRI Card Main Screen
The ACS-PRI/BRI card must be configured before you can use it. Figure 4-7 shown the
ACS-PRI/BRI call status screen, which can be accessed by selecting the ACS-PRI/BRI card
from the Main Screen. The information shown in italics below is for reference only. The
default ACS-PRI/BRI call status screen does not show this type of information until after it is
configured.
Figure 4-7. ACS-PRI/BRI Call Status Screen
4.3.1.1
Main Screen Parameters
PAGE
The page reference shows how many pages of ISDN calls that are currently active in the
system. Users can move through the pages using the “pgUp” and “pgDn” commands from the
Menu of Actions.