Auto setup” section in “t, See the “auto setup” section, See the “ipod” section in “t – Yamaha NOT FOND DSP-Z11 User Manual
Page 126
Troubleshooting
126
En
■ iPod
In case of a transmission error without a status message appearing in the front panel and in the video monitor, check the connection to your iPod (see page 36).
■ Auto Setup
Before Auto Setup
Unable to play
This unit cannot play back the songs currently
stored on your PC.
Make sure Windows Media Player 11 or Windows Media
Connect 2.0 is installed on your PC.
—
Check that the songs currently stored on your PC are playable
(MP3, WMA, MPEG-4 AAC, and WAV).
—
Store some other playable music files (MP3, WMA, MPEG-4
AAC, and WAV) on your PC.
—
The network may be overloaded with heavy traffic,
and playback is interrupted.
Try preparing a network exclusively for use with this unit to
separate it from general network traffic.
—
License Unavailable
This unit cannot find the license key of the file.
Acquire the license key of the file. For details, consult with the
supplier of the file.
—
List updated
The list of the contents stored on your PC server or
MCX-2000 has been updated.
Bookmark ON
(Bookmark OFF)
The desired Internet Radio station has been added
(removed) to the “Bookmarks” list.
Empty Memory!
No items are assigned to the selected numeric
button.
Assign the desired item to the numeric button.
Not found!
This unit cannot find the assigned item for the
selected numeric button.
Connect the USB device that stores the preset item.
—
Turn on the PC or MCX-2000.
Try again when the selected Internet Radio is providing the
service.
Preset the desired item to the numeric button (1-8) again.
USB Overloaded
Over current passes through the connected USB
device.
Turn off this unit and then disconnect the USB device. If the
message appears when you connect the USB device again, this
unit may not compatible with the USB device.
—
Status message
Cause
Remedy
See page
Note
Status message
Cause
Remedy
See page
Loading...
This unit is in the middle of recognizing the
connection with your iPod.
This unit is in the middle of acquiring song lists
from your iPod.
Connect error
There is a problem with the signal path from your
iPod to this unit.
Turn off this unit and reconnect the Yamaha iPod universal dock
to the DOCK terminal on this unit.
Try resetting your iPod.
—
Unknown iPod
The iPod being used is not supported by this unit.
Only iPod (Click and Wheel), iPod nano, and iPod mini are
supported.
—
iPod connected
Your iPod is properly stationed in a Yamaha iPod
universal dock (such as the YDS-10, sold
separately) connected to the DOCK terminal of
this unit, and the connection between your iPod
and this unit is complete.
Disconnected
Your iPod was removed from a Yamaha iPod
universal dock (such as YDS-10 sold separately)
connected to the DOCK terminal of this unit.
Station your iPod back in a Yamaha iPod universal dock (such
as YDS-10 sold separately) connected to the DOCK terminal on
this unit.
Unable to play
This unit cannot play back the songs currently
stored on your iPod.
Check that the songs currently stored on your iPod are playable.
—
Store some other playable music files on your iPod.
—
Error message
Cause
Remedy
See page
Connect MIC!
Optimizer microphone is not connected.
Connect the supplied optimizer microphone to the
OPTIMIZER MIC jack on the front panel.
Unplug Phones!
Headphones are connected.
Unplug the headphones.
—
No Setup Menu!
No check items are selected as the measurement
items.
Select the desired check item.
Memory Guard!
“Memory Guard” is set to “On”.
Set “Memory Guard” to “Off”.