Yamaha NOT FOND DSP-Z11 - Manual (Page 15)

Quick start guide
15
En
In
tr
od
ucti
on 0 0
Surround left
speaker
Front left speaker
Right subwoofer Left subwoofer
Surround back
left speaker
Left rear
presence speaker
Left front
presence speaker
Be sure to connect the left channel (L), right channel
(R), “+” (red line) and “–” (white line) properly.
Check the impedance of the speaker you are connecting. If
the impedance of your speaker is 6-ohm, change the setting of
“SPEAKER IMP.” in “Advanced setup” (see page 119).
Note
Subwoofer cable
Subwoofer
cable