ZyXEL Communications ZyXEL Vantage VSG-1000 - Manual (Page 105)

VSG-1000 Vantage Service Gateway
Troubleshooting 15-5
Figure 15-5 SMT: Debug Mode: Verifying VSG and TFTP Settings
7. The VSG downloads the firmware. After the file transfer is complete, the VSG restarts automatically.
Figure 15-6 SMT: Debug Mode: Firmware Upload Complete
8. After the VSG finishes restarting, you should see the “Press any key to continue” prompt,
press any key to display the SMT login screen. Enter “admin” as the username and “1234” as the password
to access the VSG.
----------- TFTP download parameters -----------
IP address :10.59.1.1
TFTP server IP address :10.59.1.33
Gateway IP address :10.59.1.33
Subnet mask :255.0.0.0
File name :VSG1000-10303.bin
------------------------------------------------
Do you want to change above entries(Y/N)?n
Do you want to change above entries(Y/N)?n
Attached TCP/IP interface to rtl1.
Attaching network interface lo0... done.
Downloading...
100%
Erasing FLASH...OK
Writing to FLASH...OK
Restarting...