Verifying settings – ZyXEL Communications ZyXEL Vantage VSG-1000 User Manual
Page 114
VSG-1000 Vantage Service Gateway
H
Setting Your Computer IP Address
3.
Click the DNS Configuration tab.
-If you do not know your DNS information, select
Disable DNS.
-If you know your DNS information, select Enable
DNS and type the information in the fields below (you
may not need to fill them all in).
4.
Click the Gateway tab.
-If you do not know your gateway’s IP address,
remove previously installed gateways.
-If you have a gateway IP address, type it in the New
gateway field and click Add.
5.
Click OK to save and close the TCP/IP Properties window.
6.
Click OK to close the Network window. Insert the Windows CD if prompted.
7.
Turn on your VSG and restart your computer when prompted.
Verifying Settings
1. Click
Start and then Run.
2. In
the
Run window, type "winipcfg" and then click OK to open the IP Configuration window.
3.
Select your network adapter. You should see your computer's IP address, subnet mask and default
t