XM Satellite Radio R-672 - Manual (Page 30)

ENGLISH
30
1.
Select the desired channel with preforming channel
search, direct search or category search.
2.
To memorize the channels, perform the steps 2 to 4
in "Manual presetting" procedure on page 27.
• You can store up to 30 preferred channels in the memory.
Presetting channels
• In the XM mode, select the desired preset channel.
Preset search
Note:
• If the information on artist name, song title or category is
not available, it will not be displayed correctly.
Signal strength display mode
• If the reception is poor, you can check the signal
strength of the XM radio signal and adjust the position of
the XM antenna until "GOOD" is displayed.
• You can display XM information such as channel name, artist name, song title and signal strength.
Displaying XM information
• In the XM mode,
Error message and status
• If an operation takes longer than usual or an error occurs, one of the following messages may be displayed.
Message Status
ANTENNA The XM Mini-Tuner system is not connected correctly. Check the antenna.
UPDATING The XM user encryption code is being updated. Please wait.
NO SIGNL The signal is too weak. Check the antenna connection and reposition it for the best reception.
LOADING This receiver is tuning or decoding audio or text data. Please wait.
OFF AIR The selected XM channel is not currently broadcasting. Select another channel.
• Each time the DISPLAY button is pressed, the display mode changes as follows:
Channel number/name Artist name Song title Category
Volume Surround mode Signal strength(“GOOD”, “MARGINAL”, “WEAK”, “NO SIGNL”)
• When using the NUMERIC buttons on the remote control.
Examples) For “3” :
For “15” :
For “30” :
Continued
3.
Select the desired channel in the selected category.