XM Satellite Radio R-672 - Manual (Page 38)

ENGLISH
38
Note : When the digital signals from DTS, Dolby Digital program sources are input or the EXTERNAL IN is selected as an
input source, you cannot adjust the tone and can listen to a program source without the tone effect.
OFF : To listen to a program source without the tone effect. ("DIRECT" indicator lights up.)
ON : To adjust the tone for your taste. ("DIRECT" indicator goes off.)
When the TONE is set to ON to adjust the tone (bass and treble)
Press the CURSOR UP( )/DOWN( ) buttons to select the desired tone.
Press the CURSOR LEFT( )/RIGHT( ) buttons to adjust the selected tone as desired.
When selecting the TONE
• The tone level can be adjusted within the range of -10 ~
+10 dB.
• In general, we recommend the bass and treble to be
adjusted to 0 dB (flat level).
• Extreme settings at high volume may damage your
speakers.
• To complete tone adjustment, repeat the above steps
and .
OFF : To turn off the cinema EQ function.
ON : To compensate for edgy or shrill movie sound tracks.
Note : When the EXTERNAL IN is selected as an input source, the CINEMA EQ is automatically set to OFF.
When selecting the CINEMA EQ
Continued