Yamaha SU700 - Manual (Page 245)

Chapter 10 Jobs 245
CHAPTER
10
▼ If the destination track already contains sequence data, the screen displays the
OVERWRITE? prompt. If you do not wish to overwrite, press [CANCEL] as necessary
to move back to a previous job level or to return to the main screen. If you are pre-
pared to overwrite, press [OK] to proceed.
▼ The SU700 copies the sequence data and returns you to the main screen.
TRACK EDIT | EVENT INIT
Use to: Clear all recorded sequence data (sequence events) from a selected track.
●
This job clears all sequence data recorded on the track.
●
This operation does not delete the track’s sample, its current knob settings, and its
other track-related data. (In particular, the job does not change the settings enu-
merated in the explanation for the TRACK COPY job above.)
●
If you execute this job on the MASTER track, it will delete all scene-recall events
from the song. Be aware that this may significantly affect the playback on all
other tracks. (But note that the job will never delete the top-scene recall that oc-
curs automatically when you return the song to its top position.)
●
If you execute this job on any track other than the MASTER track, the track will
continue to respond to actions generated by scene-recall events.
Procedure
Be sure that you have selected the appropriate song.
1. Press TRACK EDIT | EVENT INIT to enter this job.
▼ The screen displays
INIT TRACK SEQ , and the bank number and meter bracket in-
dicate the currently selected track (the last pad you pressed).
2. Press a bank selector and track pad (as necessary) to select the track whose events
you wish to clear.
▼ The bank number and meter bracket move to indicate the track selection.
NOTE:
The job will be meaningful only if you select a track that contains sequence data. The
screen indicates that a track contains sequence data by lighting up the six lines at the
center of the track meter.
3. Press [OK] to clear the events and return to the main screen.