Yamaha CLAVINOVA CVP-509 - Manual (Page 27)

CVP-509/505/503/501 Reference Manual 27
Styles – Pla
ying Rh
ythm and Accompaniment –
3
4
Select the channel for which you wish to replace the pattern by using the [A]–[D] and
[F]–[I] buttons. Call up the Style Selection display by pressing the same button again.
Select the Style containing the pattern you want to replace in the Style Selection
display.
To return to the previous screen, press the [EXIT] button after selecting the Style.
5
Select the desired section of the newly imported Style (chosen in step 4) by using the
[2
▲▼]/[3 ▲▼] (SECTION) buttons.
6
Select the desired channel for the section (chosen in step 5) by using the [4
▲▼]/[5
▲▼] (CHANNEL) buttons.
Repeat steps 4–6 above to replace the patterns of other channels.
7
Press the [J] (SAVE) button to execute the Save operation.
CAUTION
The edited Style will be lost if you change to another Style or turn the power to the instrument off without executing the Save operation.
Playing the Style During Style Assembly
While you are assembling a Style, you can play back the Style and select the method of playback. Use the
[6
▲▼]/[7 ▲▼] (PLAY TYPE) buttons in the Style Assembly display to select the playback method.
• SOLO
Mutes all but the selected channel in the ASSEMBLY Page. Any channels set to ON in the RECORD
display on the BASIC Page are played back simultaneously.
• ON
Plays back the selected channel in the ASSEMBLY Page. Any channels set to other than OFF in the
RECORD display on the BASIC Page are played back simultaneously.
• OFF
Mutes the selected channel in the ASSEMBLY Page.
6
4
5
[A]–[D],
[F]–[I]
buttons