Yamaha CLAVINOVA CVP-509 - Manual (Page 68)

68 CVP-509/505/503/501 Reference Manual
Registr
ation Memor
y – Sa
ving and Recalling Custom P
anel Setups –
6
Confirming the Registration Sequence Setting in the Main Display
In the Main display, you can confirm whether the Registration Memory numbers are called up according to
the sequence programmed on
pages 66–67 .
To shift the Registration Memory numbers, use the TAB [
E][F] buttons when the Main display is shown.
When pedal operation has been set in step 3 on page 66 , you can also use a pedal to select the Registration
Memory numbers in order.
To return to the first Sequence, press the TAB [
E] and [F] buttons simultaneously when the Main display is
shown. This cancels the currently selected Sequence number (the box indicator at the top right goes out). The
first Sequence will be selected by pressing one of the TAB [
E][F] buttons or by pressing the pedal.
NOTE The pedal can be used for Registration Sequence no matter which display is called up (except for the display in step 3 on page 66 ).
Saving the Registration Sequence Settings
The settings for the Sequence order and how Registration Sequence behaves when reaching the end of the
sequence (SEQUENCE END) are included as part of the Registration Memory Bank file. To store your newly
programmed Registration Sequence, save the current Registration Memory Bank file.
CAUTION
Keep in mind that all Registration Sequence data is lost when changing Registration Memory Banks, unless you’ve saved it with the Regis-
tration Memory Bank file.
1
Press the REGIST BANK [+] and [-] buttons simultaneously to call up the
REGISTRATION BANK Selection display.
2
Press the [6
▼] (SAVE) button to save the Bank file.
The Registration Sequence is indicated at
the top right of the Main display, letting you
confirm the currently selected number.