5 configuring dhcp vlan settings – ZyXEL Communications XGS-4728F User Manual
Page 309
Chapter 36 DHCP
XGS-4728F User’s Guide
309
36.5 Configuring DHCP VLAN Settings
Use this screen to configure your DHCP settings based on the VLAN domain of the
DHCP clients. Click IP Application > DHCP in the navigation panel, then click the
VLAN link In the DHCP Status screen that displays.
Note: You must set up a management IP address for each VLAN that you want to
configure DHCP settings for on the Switch. See
for
information on how to do this.
Figure 177 IP Application > DHCP > VLAN
The following table describes the labels in this screen.
Table 115 IP Application > DHCP > VLAN
LABEL
DESCRIPTION
VID
Enter the ID number of the VLAN to which these DHCP settings apply.
DHCP Status
Select whether the Switch should function as a DHCP Server or Relay for
the specified VID. If you select Server then fields related to DHCP relay
configuration are grayed out and vice versa.