Xantrex Technology ENERGY HW 1000 - Manual (Page 40)

4–2 975-0467-01-01
Display Panel Operation
The Freedom HW features a display panel with three-digit LED display
screen to show inverter, AC source, and battery status information.
Feature Description
1 Power button
•
Press and hold for one second to turn the Freedom HW ’s Inverter function ON or OFF
(when AC Shore Power is NOT present.)
• Press and hold for five seconds to go into Feature Setting Mode.
2 Three-digit LED display screen shows status information and fault codes.
3 Status LED – indicates the mode of operation with a three-color LED.
•
Green pertains to Utility status.
• Solid indicates the Freedom HW is in shore power mode and battery is fully charged.
• Flashing indicates the Freedom HW is in shore power mode and the unit is currently
charging the battery.
• Yellow pertains to Battery status.
• Solid indicates the Freedom HW is in inverter mode and using the battery to provide
AC power.
• Flashing indicates the Freedom HW is in inverter mode but AC shore power is
detected thus transferring to shore power mode within 20 seconds.
• Red indicates a Fault condition and the Freedom HW has shut down. See
“Troubleshooting Reference” on page 5–8 .
4 Select button
•
In Invert mode, press the button to choose what appears in the three-digit LED display.
See
“Viewing Inverter/Charger Information” on page 3–3 .
NOTE: A corresponding LED light either flashes or illuminates solid for each item.
• In Feature setting mode, press to toggle through different selections and press and hold
for five seconds to make the selection permanent. See
“Adjusting Feature Settings” on
page 3–3 .
FREEDOM
HW 1000
Input Voltage (V)
Select
STATUS
Battery
Fault
Utility
Input Current (A)
Output Power (kW)
4
1 2
3
Info and Settings LED lights