York STELLAR PLUS H4DH018 THRU 060 - Manual (Page 2)

036-21020-003 Rev. C (0203)
2 Unitary Products Group
All dimensions are in inches. They are subject to change without
notice. Certified dimensions will be provided upon request.
Physical and Electrical Data
MODEL H4DH018S06 H4DH024S06 H4DH030S06 H4DH036S06 H4DH042S06 H4DH048S06 H4DH060S06
Unit Supply Voltage 208/230 – 1 – 60
Normal Voltage Range 1
1. Rated in accordance with ARI Standard 110, utilization range “A”.
187 to 252
Minimum Circuit Ampacity 10.1 12.1 18.5 22.0 25.2 31.6 37.4
Max. Overcurrent Device Amps 2
2. Dual element fuses or HACR circuit breaker.
15 20 30 35 40 50 55
Compressor Type 3
3. All scrolls listed with a superscript “B” are Bristol scrolls. All scrolls listed with a superscript “C” are Copeland scrolls.
Recip Inertia Scroll B Scroll B Scroll B Scroll B Scroll C
Compressor Amps
Rated Load 7.7 9.3 14.1 16.6 19.2 24.3 28.8
Locked Rotor 48 57 78 98 105 150 169
Crankcase Heater No Yes No No No No No
Fan Motor Amps Rated Load 0.5 0.5 0.9 1.2 1.2 1.2 1.4
Fan Diameter Inches 18 18 18 24 24 24 24
Fan Motor
Rated HP 1/12 1/12 1/8 1/4 1/4 1/4 1/3
Nominal RPM 1100 1100 1075 850 850 850 1100
Nominal CFM 1500 1500 2050 3100 3100 3100 4100
Coil
Face Area Sq. Ft. 14.1 14.1 14.1 20 20 24 24
Rows Deep 1 1 1 1 1 1 1
Fin / Inches 20 20 20 18 18 20 20
Liquid Line OD 3/8 3/8 3/8 3/8 3/8 3/8 3/8
Vapor Line OD 5/8 3/4 3/4 3/4 7/8 7/8 7/8
Unit Charge (Lbs. - Oz.) 4
4. The Unit Charge is correct for the outdoor unit, matched indoor coil and 15 feet of refrigerant tubing. For tubing lengths other than 15 feet, add or
subtract the amount of refrigerant, using the difference in length multiplied by the per foot valve.
4 - 14 5 - 1 5 - 4 5 - 15 6 - 12 8 - 10 7 - 13
Charge Per Foot, Oz. 0.68 0.68 0.68 0.68 0.70 0.70 0.70
Operating Weight Lbs. 144 154 148 225 230 235 243
48" OVERHEAD
CLEARANCE
C
B
A
5-1/2
2-3/8
3-1/8
VAPOR
CONNECTION
LIQUID CONNECTION
AIR IN
4 SIDES
UNIT
MODEL
HDH
DIMENSIONS
(INCHES)
REFRIGERANT
CONNECTION
LINE SIZE
A B C Liquid Vapor
018 30-1/8 24 24
3/8
5/8
024 30-1/8 24 24
3/4 030 30-1/8 24 24
036 31-7/8 35 35
042 31-7/8 35 35
7/8 048 37-7/8 35 35
060 37-7/8 35 35