Maintenance chart, Maintenance – Yamaha LF225 User Manual

Page 62

Advertising
background image

Maintenance

56

EMU30563

Maintenance chart

NOTE:

Refer to the sections in this chapter for explanations of each owner-specific action.

The maintenance cycle on these charts assume usage of 200 hours per year and regular
flushing of the cooling water passages. Maintenance frequency should be adjusted when op-
erating the engine under adverse conditions such as extended trolling.

Disassembly or repairs may be necessary depending on the outcome of maintenance
checks.

Expendable or consumable parts and lubricants will lose their effectiveness over time and
through normal usage regardless of the warranty period.

When operating in salt water, turbid or muddy water, the engine should be flushed with clean
water after each use.

The “

” symbol indicates the check-ups which you may carry out yourself.

The “

” symbol indicates work to be carried out by your Yamaha dealer.

Item

Actions

Initial

Every

10 hours

(1 month)

50 hours

(3 months)

100 hours

(6 months)

200 hours

(1 year)

Anode(s) (external)

Inspection / replace-
ment

Anode(s) (cylinder
head, thermostat cov-
er)

Inspection / replace-
ment

Battery

Inspection / charging

Cooling water passag-
es

Cleaning

Cowling clamp

Inspection

Fuel filter (can be dis-
assembled)

Inspection / replace-
ment

Fuel system

Inspection

Fuel tank (Yamaha por-
table tank)

Inspection / cleaning

Gear oil

Change

Greasing points

Greasing

Idling speed

Inspection

PCV (Pressure Con-
trol Valve)

Inspection

Power trim and tilt unit

Inspection

Propeller and cotter pin

Inspection / replace-
ment

Shift link / shift cable

Inspection / adjustment

U69J17E0.book Page 56 Tuesday, March 7, 2006 10:00 AM

Advertising
This manual is related to the following products: