Treatment of submerged motor, Trouble recovery – Yamaha LF225 User Manual

Page 83

Advertising
background image

Trouble Recovery

77

4.

Unscrew the filter cup from the filter hous-
ing.

NOTE:

Be careful not to twist the water detection
switch lead when unscrewing the filter cup.

5.

Drain the water in the filter cup by soaking
it up with a rag.

NOTE:

Properly dispose of the rag.

6.

Firmly screw the filter cup onto the filter
housing.

NOTE:

Be careful not to twist the water detection
switch lead when screwing the filter cup onto
the filter housing.

7.

Connect the water detection switch cou-
pler securely until a click is heard.

8.

Install the top cowling.

9.

Start the engine and make sure that the
water separator warning indicator re-
mains off.

NOTE:

Have a Yamaha dealer inspect the outboard
motor after returning to port.

EMU29760

Treatment of submerged motor

If the outboard motor is submerged, immedi-
ately take it to a Yamaha dealer. Otherwise
some corrosion may begin almost immediate-
ly.
If you cannot immediately take the outboard
motor to a Yamaha dealer, follow the proce-
dure below in order to minimize engine dam-
age.

1. Water detection switch coupler

1. Filter cup

2. Water detection switch lead

1. Water detection switch coupler

U69J17E0.book Page 77 Tuesday, March 7, 2006 10:00 AM

Advertising
This manual is related to the following products: