Select the temperature, Select the spin speed or the rinse hold option, Select the desired options – Zanussi FR 1450 W User Manual

Page 10: Start the programme, How to change a programme during its cycle

Advertising
background image

10

6. Select the temperature

Press the TEMPERATURE button if you wish to select
a temperature value different from the one proposed by
the washing machine.
The relevant light will light up.

7. Select the spin speed or the

RINSE HOLD option

Press the SPIN SPEED button repeatedly, in order to
select the desired spin speed or the RINSE HOLD
option. The relevant light will light up.
If you select the RINSE HOLD option, the machine will
stop at the end of the programme with the water still in
the tub.
FR 1250 W
FR 1250 S

FR 1450 W

8. Select the desired options

If your laundry is very dirty, it may be advisable to
select the PREWASH option.
If your laundry is lightly or normally soiled and it is
necessary to prolong the washing time, select the 40AA
option.
If you wish to reduce water consumption on the rinse
cycle when washing a smaller load of cottons or linens,
select HALF LOAD option

SPIN SPEED

1400

900

700

500

RINSE

HOLD

SPIN SPEED

1200

900

700

500

RINSE

HOLD

60°C

50°C

95°C

40°C

TE

M PERATU

RE

30°C

9. Start the programme

Press the START/PAUSE button. The relevant light will
stop flashing, the DOOR LOCKED light will light up,
and only the light relevant to the phase that is in
progress will remain lit.

10. How to change a programme

during its cycle

Before you make any change, you must pause the
washing machine by pressing the START/PAUSE
button.
It is possible to change any phase before the programme
carries it out.
Changing the type of fabric or temperature is possible,
obviously, only during the washing phase. When you
make a change in these two parameters, the washing
machine will resume the cycle from the beginning.

If it is necessary to drain the water in order to change
the programme in progress, proceed as follows:

• PAUSE the machine by pressing the START/PAUSE

button;

• press the SKIP/RESET button repeatedly, until only

the light

remains lit;

• press the START/PAUSE button again.

You may now select a new programme and press the
START/PAUSE button to start it.

START/PAUSE

OPTIONS

PREWASH

SUPER

RINSE
EXTRA

QUICK

Advertising
This manual is related to the following products: