Zanussi FR 1450 W - Manual (Page 8)

8
•DRAIN
Depress RESET three times, the pilot lights WASH
, RINSES and SPIN go out.
Example:
In this case the machine
will perform the rinses
and spin.
• If the machine is switched off:
- depress ON/OFF button to switch it on;
- select the type of fabric by means of the relevant
button:
- select the special programme as previously
described.
9 Programme phase indicator
lights
When you select a programme, the lights relevant to the
phases that form the programme light up.
After you have started the programme, only the light
relevant to the phase that is currently being carried out
will remain lit.
At the end of the programme the pilot light
illuminates.
If the light lights up at the end of the programme this
means that the drain pump is clogged.
In the event of operating problems light starts to
flash:
1 flash = the machine does not fill
2 flashes = the machine does not empty
4 flashes = the door has not been closed
To eliminate the problem, see paragraph “Something not
working”.
PREWASH
WASH
RINSES
RINSE HOLD
SPIN
DRAIN
END
PUMP