Yamaha Magicstomp BASS EFFECTS PROCESSOR - Manual (Page 24)

24
In Tune!
TUNE 0 PITCH:440Hz
E 0 : 00000 >|<
Raise Pitch
Lower Pitch
TUNE 0 PITCH:440Hz
00 : 000000 | 000000
Standard Pitch
Note Name
00000 >|
| 00 <
| 0 <
| 000 <
|<
000 > 00 |
00 > 000 |
0000 > 0 |
Tuner Mode
This mode is used for tuning your bass. In the Tuner Mode, the MAGICSTOMP functions
as a chromatic tuner.
* The signal from the MAGICSTOMP’s OUTPUT jack and PHONES jack is muted when in the Tuner Mode (no
sound will be produced).
■ Using the tuner
1
Press and hold the ON/OFF switch until the tuner display (shown below) ap-
pears on the display.
With your bass connected to the INPUT jack, use the display to tune your bass.
* The Tuner Mode is not available during the store operation.
2
If you want to use a standard pitch other than 440Hz, use the – or + switches.
The standard pitch can be set anywhere between 438Hz and 445Hz in the MAGICSTOMP.
3
Play the string you want to tune (play a single tone).
1. First, tune the bass until the name of the note you want to tune to appears on the display.
2. When the string’s pitch is low,
>
mark will be displayed and the – switch’s lamp will be lit.
When the string’s pitch is high,
<
mark will be displayed and the + switch’s lamp will be lit.
The string’s pitch is in tune when “
>|<
” appears in the display and the ON/OFF switch’s
lamp is lit.
4
Press the ON/OFF switch to return to the original display.