Yamaha Magicstomp BASS EFFECTS PROCESSOR - Manual (Page 25)

25
00 FACTORY 00 SET 00
0 NO:[-] 0 YES:[+]
00 FACTORY 00 SET 00
SURE?PUSH[STORE]
■ Restoring the factory defaults
Hold down both the ON/OFF switch and [STORE/EXIT] button then plug in the power adaptor con-
nected to the unit, and “FACTORY SET” will appear in the display.
Press the [STORE/EXIT] button to execute the Factory Set operation. All settings in the User Patch
memory will be overwritten with factory default settings, which are the same as the Preset Patches.
* Press either the –, + or ON/OFF switch to cancel the factory set operation, and the MAGICSTOMP will start
normal operation.
When you restore the factory default settings, all data for the current settings in
the User Patch memory will be lost. We recommend that you make a note of, or
back up to a computer, any important data or settings.
Factory Set
(Restore Factory Defaults)
Press the + switch and the display will ask for your confirmation.
* Pressing the – switch cancels the Factory Set operation and the MAGICSTOMP will start normal operation.