XM Satellite Radio XDNX1V1 - Manual (Page 104)

104
If this happens: Try this:
No audio when using the Aux In
Cable or Cassette Adapter • Check all cables between your onyX and your
vehicle’s stereo system for a firm and secure
connection .
• Ensure you have selected the proper input source
on your vehicle’s stereo system .
• If you are using the Vehicle Dock that came with
the Universal Xpress Car Kit, ensure that the FM
Transmitter in the onyX is turned Off, and increase
the audio level of the onyX . Refer to “Set Audio
Level” on page 89 .
Audio fades or has static when
listening • Check all cables for a firm and secure connection .
• If you are using PowerConnect to listen via your
vehicle’s FM radio, and the problem persists, it
most likely is interference from another commercial
or broadcast FM station . You will need to find an
unused or available FM channel in your area . Refer
to “Find Available FM Channels in Your Area” on
page 79 .
• If you are using PowerConnect, and you cannot
solve the audio problem, try connecting the audio
using the Aux In Cable or a Cassette Adapter .
(Refer to page 39 and page 41 .) If you cannot use those
solutions, consider using an FM Direct Adapter .
(Refer to page 47 .)
Troubleshooting