XM Satellite Radio XDNX1V1 - Manual (Page 36)

36
windshield, route the cable out of the windshield molding and into the
rubber weather stripping around the door opening . Lift the weather
stripping from the opening and tuck the cable inside it, then replace
the weather stripping . Run the cable inside of the weather stripping
to the bottom of the door opening .
4 . Pull the cable out of the weather stripping at the bottom of the
door opening and route it under the carpet toward the dashboard .
Coil any excess cable in a hidden location, such as under the carpet,
keeping it away from any vehicle pedals or controls . Secure the
excess cable with wire ties .
5 . Bring the end of the cable out at the PowerConnect Vehicle Dock
location . Leave yourself enough cable so you can easily connect it
to the antenna connector of the dock .
6 . Continue with “Step 5: Connect the Magnetic Mount Antenna and
PowerConnect Power Adapter” on page 37 .
Vehicle Installation