XM Satellite Radio XDNX1V1 - Manual (Page 31)

31
knife or similar blunt tool to lift the plastic trim just enough to
tuck the cable under underneath . Avoid side airbag locations
on back pillars and above the doors . Airbag locations are
marked with “SRS” logos . Be careful not to crimp or cut the
cable .
5 . Bring the cable out from the trim near the front of the cabin
and route it under the carpet toward the dashboard or console .
Coil any excess cable in a hidden location, such as under the
carpet, keeping it away from any vehicle pedals or controls .
Secure the excess cable with wire ties (purchased separately) .
6 . Bring the end of the cable out at the PowerConnect Vehicle
Dock location . Leave yourself enough cable so you can easily
connect it to the antenna connector of the dock .
7 . Continue with “Step 5: Connect the Magnetic Mount Antenna
and PowerConnect Power Adapter” on page 37 .