B)play style – Yamaha RX-N600 User Manual

Page 89

Advertising
background image

85

En

SET MENU

AD

V

A

N

C

ED

OPERA

T

ION

Primary DNS server

DNS (P)

Secondary DNS server

DNS (S)

Use this parameter to specify the IP address of the primary
and secondary DNS (Domain Name System) servers.

If you have only one DNS address, enter the DNS address in
“DNS (P)”. If you have two or more DNS addresses, enter one of
them in “DNS (P)” and another in “DNS (S)”.

1

Press

u

/

d

on the remote control repeatedly

and then press ENTER to select and enter
the desired network parameter.

When “DHCP” is set to “ON”, you cannot select and adjust
any other network settings. To specify the other parameters,
you need to first set “DHCP” to “OFF”.

2

To specify the parameter, press

u

/

d

repeatedly

to change the number and press

j

/

i

to select

the digit to change.

3

Press ENTER to confirm the parameter.

4

Repeat steps 1 through 3 to configure each
network parameter.

5

Select “SET” and then press ENTER to finish
configuration.

In case you have changed your network configuration, you may
need to reconfigure the network settings again.

y

You can reset the network settings of this unit to the initial factory
settings by using “N-RESET” in the advanced setup menu (see
page 91
).

Playback styles

B)PLAY STYLE

Use this feature to adjust the playback style according to
your preference. You can shuffle songs in a random order
or repeat one specific song or a sequence of songs.

Repeat

REPEAT

Use this feature to set this unit to repeat one song or a
sequence of songs.
Choices:

OFF

, SINGLE, ALL

• Select “OFF” to deactivate this feature.
• Select “SINGLE” to set this unit to repeat one song.
• Select “ALL” to set this unit to repeat a sequence of

songs.

• When “REPEAT” is set to a setting other than “OFF”, the

highlighted letter “R” appears in the top right corner of the
playback status screen while one song or a sequence of songs
are being repeated.

• If “REPEAT” is set to “SINGLE”, the setting will be reset to

“OFF” when both the main zone and Zone 2 are turned off.

Shuffle

SHUFFLE

Use this feature to set this unit to play songs or albums in a
random order.
Choices:

OFF

, ON

• Select “OFF” to deactivate this feature.
• Select “ON” to set this unit to play songs or albums in a

random order.

When “SHUFFLE” is set to “ON”, the highlighted letter “S”
appears in the top right corner of the playback status screen while
songs or albums are being shuffled.

Note

Note

Note

Notes

Note

. REPEAT;;;;;;;OFF

SHUFFLE

;;;;;;OFF

[ ]/[ ]:Up/Down
[<]/[>]:Select

B)PLAY STYLE

p

p

Advertising