Yamaha DPX-1 - Manual (Page 28)

E- 25
English
MENU
This unit has a memory function that can store six settings to
project different types of input sources in the most appropriate
manner. Select one of these six settings that is most suitable for
your projection. Although six settings have already been prepared,
each parameter in the settings can be changed and restored as you
wish. The following lists the menu items that can be stored in
memory.
Memory function
■ Selecting the memory setting number
To select by operating the remote control
Press the number of the desired memory setting among the
MEMORY 1—6 buttons.
To select by operating the menu
1.
Press the MENU button to open the menu.
2. Press the g button to enter the memory setting
number at the bottom of the screen.
IMAGE
BLACK LEVEL
CONTRAST
BRIGHTNESS
GAMMA TRIM
SHARPNESS
HUE
SATURATION
COLOR BOOST
COLOR TEMP
WHITE BALANCE
WHITE BOOST
SIGNAL
3D Y/C SEPARATION
NOISE REDUCTION
VIDEO TYPE
SETUP LEVEL
MEMORY
1 2 3
4 5 6
IMAGE SIGNAL INITIAL SETUP
AUTO
MOMORY1 VIDEO
OFF ON
0% 7.5%
DVD VCR
OFF 1 2 3
3D Y/C SEPARATION
ASPECT
NOISE REDUCTION
VIDEO TYPE
SETUP LEVEL
SUBTITLE MASK
MASK POSITION 0
+: EDIT
OFF ON
3. Press the + button to open the submenu.
4. Select the desired memory setting number by
pressing the h or g button.
5. Press the ESCAPE button to close the submenu.
IMAGE SIGNAL INITIAL SETUP
ESCAPE: EXIT MEMORY6
MEMORY5
MEMORY4
MEMORY3
MEMORY2
MEMORY1
VIDEO
ESCAPE
MENU