Yamaha YSP-1100 User Manual
Oyamaha
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Table of contents
Document Outline
- Explanation of Graphical Symbols
- CAUTION: READ THIS BEFORE OPERATING THIS UNIT.
- CONTENTS
- OVERVIEW
- FEATURES
- USING THIS MANUAL
- Notes
- 1 Install this unit In your listening room.
- 2 Connect this unit to your TV and other external components.
- 3 Prepare the remote control and turn on the power of this unit.
- 4 Run AUTO SETUP.
- 5 Play back a source.
- 6 Change the beam modes and/or CINEMA DSP settings.
- 7 Run MANUAL SETUP to fine-tune settings and/or set remote control codes.
- Notes
- SUPPLIED ACCESSORIES
- CONTROLS AND FUNCTIONS
- Front pane!
- Front panel display
- Rear panel
- © RS-232C/REMOTE IN terminals
- © DVD COAXIAL DIGITAL IN jack
- © AUX OPTICAL DIGITAL IN Jack
- © TV/STB OPTICAL DIGITAL IN jack
- © TV/STB AUDIO IN jacks
- ® VCR AUDIO IN jacks
- © SUBWOOFER jack
- © VCR VIDEO IN jack
- ® DVD/AUX VIDEO IN jack
- ® DVD/AUX COMPONENT VIDEO IN jacks
- ® STB VIDEO IN jack
- ® STB COMPONENT VIDEO IN jacks
- ® VIDEO OUT jack
- ® COMPONENT VIDEO OUT jacks
- ® IR-OUT terminal
- ® AC IN
- Remote control
- 0 Infrared window
- (2) STANDBY/ON
- (3) Transmission indicator
- 0 Input selector buttons
- ® VOL MODE
- ® AUTO SETUP
- ® Numeric buttons
- ® STEREO
- ® Sound field program buttons
- ® CH LEVEL
- ® Cursor buttons ^ / Yz / <] / |>, ENTER
- © TEST
- ® VOLUME+/-
- ® MUTE
- © TV INPUT
- ® DVD playerA^CR control buttons
- © My beam microphone
- ® TV POWER
- ® AV POWER
- @ INPUT1/INPUT2
- (g) MACRO
- ® SLEEP
- @ INPUTMODE
- (g) Beam mode buttons
- @ SURROUND
- (g) MY BEAM
- @ TruBass
- @) MENU
- (g Operation mode selector
- @ RETURN
- (g) TVVOL+/-
- ® CH+/-
- ® TV MUTE, CODE SET
- INSTALLATION
- CONNECTIONS
- GETTING STARTED
- USING SET MENU
- CHANGING OSD LANGUAGE
- AUTO SETUP (IntellìBeam)
- The flow Chari of AUTO SETUP
- Installing the optimizer microphone
- Using AUTO SETUP (InlelllBeam)
- ■ Assembling the supplied cardboard microphone stand
- Notes
- 1 Press STANDBY/ON on the front panel or on the remote control to turn on the power of this unit.
- 3 Press MENU on the remote control.
- Press ^ ^ on the remote control to select AUTO SETUP and then press ENTER.
- Set the operation mode selector to YSP to switch to the operation mode of this unit.
- Check that the following screen is displayed on your TV.
- 10 Disconnect the optimizer microphone from the OPTIMIZER MIC jack on the front panel.
- Press ENTER to confirm the results or press RETURN to cancel the results.
- ■ Error messages for AUTO SETUP Before the AUTO SETUP procedure starts
- While the AUTO SETUP procedure is in progress
- Notes
- ■ Assembling the supplied cardboard microphone stand
- USING THE SYSTEM MEMORY
- Convenient usage of the system memory
- Loading settings
- 1 Set the operation mode selector to YSP to switch to the operation mode of this unit.
- 2 Press MENU on the remote controi.
- 6 Press ENTER again.
- 7 Press MENU to exit.
- 3 Press ^ ^ to select MEMORY and then press ENTER.
- 4 Press to select LOAD and then press
- ENTER.
- 6 Press ENTER again.
- 5 Press ^ / xz to select MEMORY1, MEMORY2 or MEMORY3 and then press ENTER.
- 7 Press MENU to exit.
- PLAYBACK
- ENJOYING SURROUND SOUND
- Note
- 5 beam
- Stereo plus 3 beam
- Steam
- Enjoying 2~channei sources in surround sound
- Adfusting surround mode parameters
- ENJOYING STEREO SOUND
- PLAYING BACK SOUND CLEARLY (My beam)
- USING SOUND FIELD PROGRAMS
- USING THE VOLUME MODE (Night listening mode/TV volume equal mode)
- USING BASS SOUND ENHANCER (TruBass)
- USING THE SLEEP TIMER
- Set the operation mode selector to YSP to switch to the operation mode of this unit.
- Press SLEEP on the remote control repeatedly to set the amount of time for the sleep timer.
- 3 Wait for a few seconds without operating this unit to confirm the setting for the sleep timer.
- ^ I ^
- Canceling the sleep timer
- MANUAL SETUP
- SOUND MENU
- BEAM MENU
- INPUT MENU
- DISPLAY MENU
- Using MANUAL SETUP
- BEAM MENU
- ■ SETTING PARAMETERS (Setting parameters)
- ■ BEAM ADJUSTMENT (Beam adjustment)
- ■ IMAGE LOCATION (Image location)
- ■ TONE CONTROL (Tone control)
- SUBWOOFER SET (Subwoofer set)
- ■ MUTE LEVEL (Muting level)
- ■ AUDIO DELAY (Audio delay)
- ■ ROOM EQ (Room equalizer)
- ■ DD/DTS Dynamic Range
- (Dynamic range of Doiby Digitai and DTS signais)
- ■ INPUT ASSIGNMENT (Input assignment)
- ■ INPUT MODE (Input mode)
- ■ INPUT TRIM (Input trim)
- ■ INPUT RENAME (Input rename)
- ■ DIMMER SET (Dimmer settings)
- ■ OSD SET (OSD settings)
- ■ UNIT SET (Unit settings)
- ADJUSTING THE AUDIO BALANCE
- SELECTING THE INPUT MODE
- ADJUSTING SYSTEM PARAMETERS
- REMOTE CONTROL FEATURES
- Setting remote control codes
- Controlling other components
- ■ Operating your TV
- Set the operation mode selector to TV/AV and then press TV to select TV as the input source.
- © TV POWER
- © TVINPUT1/2
- @ Numeric buttons
- ® CH+/-
- ® TVVOL+/-
- ® TV MUTE
- © TV INPUT
- ® AV POWER
- © Numeric buttons
- @ MENU
- ® Cursor buttons ^ / <] / t>, ENTER
- © RETURN
- © Operation buttons for DVD and VCR players
- Set the operation mode selector to TV/AV and then press VCR to select VCR as the Input source.
- ■ Operating your STB (CATV/Satellite tuner)
- ■ Operating your TV
- Using the TV macro
- TROUBLESHOOTING
- GLOSSARY
- SPECIFICATIONS
- ^YAMAHA
- YSP-nOO